Solar Water Solutions

______________________

 

Clean drinking water using free solar energy, reducing operating costs by 90%.

 

The 2017 MBR Global Awards Water Awards Prize introduces the world’s greenest water treatment solutions with low life-cycle costs.

 

Anticor in partnership with Solar Water Solutions provides sustainable and economically efficient scaleable water purification products. You can produce clean drinking water from seawater, lakes, rivers and boreholes using 100% solar energy. With Solar Water Solutions, you become completely independent from external water supplies in remote locations.The mobile stand-alone units of Solar Water Solution operate with renewable energy, without batteries or energy storage. Scalable SolarRO units are easy to install and operate with low maintenance and optional remineralisation. The ultimate aim is to replace all polluting and noisy diesel generators with solar power in off-grid water purification.

Fresh and Brackish Water Products

SolarRO MINI Series

High quality product water

In our MINI units we use modern, high quality thin-film composite RO (Reverse Osmosis) membranes, which remove all impurities, bacteria, viruses and other contaminants from the feed water, leaving only high-quality water as the end

product. Active Carbon filter and the UV treatment at the end of the purification process give the drinking water a good taste and ensure its 100% disinfection.

Energy source

The SolarRO MINI units operate directly with solar panels, without any batteries between. But you can switch it to grid, generator or batteries anytime.

Easy to use

Just install the unit ́s suction hose into the water source, connect the solar PV cables and push the start button and you begin to get clean water. No adjustments needed.

Self-priming pump

Up to 2.5m height. For greater lifts you can use a feed pump, which we can provide.

Quick and easy maintenance

All the filters and membranes are readily accessible for very easy replacement. They can be changed in a few minutes. Depending on the user case, pre-treatment filters should be changed 2–4 times per year. We recommend changing the RO membranes every 3–5 years.

Great durability

The MINI units are made from the very best materials and the metallic body, pressure vessels and tubes can withstand tens of years.

SolarRO MINI 50

  • Easy to operate.
  • No adjustments needed.
  • Production capacity from lakes, rivers, ponds or floodwater 50 litres/hour and from 0.5% saline brackish water 25 litres/hour.

Technical Specifications

Tested approx. product water (permeate) flow

Feed water

Feed water TDS


Test water temperature

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


Pre-filter casing

Permeate post treatment

UV lamp life span

Permeate quality

Power requirement


PV panels recommended

Dimensions


Weight


Warranty

50L/hr  - 25L/hr

Lake/ River Brackish

500 mg/L-  6.000 mg/L

18C

99 %


12VDC /120W


Diaphragm


9bar


2521, SS 316L


1 x 2521, polyamide


SS 316L


3 x 5” 5μm, 50μm PP filter and 5μm Active Carbon

3 x 5" PVC


Ultra Violet treatment + Mineralizing


9000 hours


pH 6.5 -8.5, 100% disinfect

max. 150Wp


2 x á 140 Wp / 17VDC or 1x 250 Wp / 37VDC

L=73cm, B=28cm, H=29cm


15Kg


1 Year (filters & membranes not under warranty)

SolarRO MINI 150

  • Clean drinking water production from lakes, rivers, ponds or floodwater 150 litres/hour and 0.5% saline brackish water 60 litres/hour.

Technical Specifications

Tested approx. product water (permeate) flow

Feed water

Feed water TDS


Test water temperature

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


Pre-filter casing

Permeate post treatment

UV lamp life span

Permeate quality

Power requirement


PV panels recommended

Dimensions


Weight


Warranty

150L/hr — 60L/hr

Lake/ River Brackish

500 mg/L 6.000 mg/L

18C

99 %


0,37kW/230 VAC or 300W/24 VDC


Rotary vane


9 - 12 bar, automatically self-adjusting


2 x 2521, SS316L


2 x 2521, polyamide


SS 316L


3 x 10” (5μm, 50μm ,100μm PP filter)

3 x 10" PVC


1 x 5” 5um 800mg Active Carbon, Ultraviolet

9000 hours


pH 6.5 -8.5, 100% disinfected

max. 250Wp

2 x 250 Wp /37V or 3 x 140 Wp /17V


L =77cm, B =45cm, H =44cm


28 Kg


1 Year (filters & membranes not under warranty)

SolarRO PRO Series

High quality product water

In our units we use modern, high quality thin-film composite RO (Reverse Osmosis) membranes, which remove all impurities, bacteria, viruses and other contaminants from the feed water, leaving only high-quality water as the end product. Active Carbon filter and UV treatment at the end of the purification process give the drinking water a good taste and ensure its 100% disinfection.

Energy source

SolarRO PRO unit operates directly with solar panels, without any batteries between. You can also switch it to grid or generator for clean water production during non-solar hours.

Easy to use

Install the unit ́s suction hose into the water source, connect the solar PV cables and push the start button and you begin to get clean water. No other adjustments needed.

Water source

When water source is a borehole or well, usually a submersible pump is used to feed water into an intermediate tank, which can be on the ground level or higher installed. The unit uses this tank as its water source.

Easy maintenance

All the filters and membranes are readily accessible for very easy replacement. The filters can be changed to new ones in a couple of minutes. Also the membranes are very easy to replace, taking 5–10 minutes each. Depending on the user case, pre- treatment filters should be changed 2–4 times per year. We recommend changing the RO membranes every 3–5 years. 

The PRO units have an integrated membrane cleaning system for better production efficiency and longer membrane life span.

Great durability

The SolarRO PRO units are made from the very best materials and the aluminium frame, pressure vessels and tubes are expected to withstand at least twenty years.

SolarRO PRO 300

  • Designed for demanding island and desert conditions. The power source can be switched to an electrical grid or a generator.

Technical Specifications

Tested approx. product water (permeate) flow

Feed water

Feed water TDS


Test water temperature

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


Pre-filter casing

Permeate post treatment

UV lamp life span

Permeate quality

Power requirement


PV panels recommended

Alternative power supply

Dimensions


Weight


Warranty

300L/hr  - 190L/hr

Lake/ River Brackish

500 mg/L-  6.000 mg/L

20C

99 %


0,5kW/230 VAC or 400W/24 VDC


Rotary vane


14 - 15 bar, automatically self-adjusting


4 x 2521, SS316L


4 x 2521, polyamide


SS 316L


3 x 10” (5μm, 50μm ,100μm PP filter)


3 x 10" PVC


1 x 10” 5um 800mg Active Carbon + UV


9000 hours


pH 6.5 -8.5, TDS 37- 95 mg/L, 100% disinfect
max. 150W

4 x 250 Wp


Grid 230VAC or 1kW Generator or Battery 24V

L = 88cm, W = 59cm, H = 60cm


45 kg


1 Year (filters & membranes not under warranty)

SolarRO PRO 700

  • Clean quality drinking water from brackish water sources.
  • Low operational costs.
  • Affordable water supply.
  • Clean drinking water production from lakes, rivers and boreholes 660 litres/hour

    and 0.5% saline brackish water 150 liters/hour.

Technical Specifications

 

Tested approx. product water (permeate) flow

Feed water

Feed water TDS


Test water temperature

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


Pre-filter casing

Permeate post treatment

UV lamp life span

Permeate quality

Power requirement


PV panels recommended

Alternative power supply

Dimensions


Weight


Warranty

660L/h  - 440/hr

Lake/ River Brackish

500 mg/L-  6.000 mg/L

20C

99 %


0.75 kW/230 VAC/50Hz


Rotary vane


approx. 16bar, automatically self-adjusting


4 x 2540, composite


4 x 2540, polyamide


SS 316L


3 x 10” thick, (5μm, 50μm ,100μm PP filter)


3 x 10" thick, PVC


1 x 10” 5μm 800mg active carbon + UV


10.000 hours


pH 6.5 - 8.5, TDS 37- 75 mg/L, 100% disinfected

max. 0.75kW


8 x 250 Wp


Grid 230VAC or 1kW/ 230VAC/ 50Hz generator


L = 1.5m, W = 0.6m, H = 1.4m


65kg


1 Year (filters & membranes not under warranty)

 

SolarRO PRO 1500

  • Potable drinking water from brackish water sources.
  • Weatherproof and durable solution.
  • Clean drinking water production from lakes, rivers and boreholes 1550 litres/hour and 0.5% saline brackish water 150 liters/hour.

Technical Specifications

 

Tested approx. product water (permeate) flow

Feed water

Feed water TDS


Test water temperature

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


Pre-filter casing

Permeate post treatment

UV lamp life span

Permeate quality

Power requirement


PV panels recommended

Alternative power supply

Dimensions


Weight


Warranty

1550 L/h  - 1100/hr

Lake/ River Brackish

500 mg/L-  6.000 mg/L

20C

99 %


2.2kW/230 VAC/50Hz


Rotary vane


approx. 16bar, automatically self-adjusting


4 x 2540, composite


4 x 2540, polyamide


SS 316L


3 x 10” thick, (5μm, 50μm ,100μm PP filter)


3 x 10" thick, PVC


1 x 10” 5μm 800mg active carbon + UV


10.000 hours


pH 6.5 - 8.5, TDS 37- 75 mg/L, 100% disinfected

max. 2.2kW


18 x 250 Wp


3-ph/ 400VAC or Generator 3kW/ 400VAC 50Hz

L = 1.5m, W = 0.6m, H = 1.4m


95kg


1 Year (filters & membranes not under warranty)

 

Sea Water Products

SolarRO Pro SW Series

High quality product water

SolarRO PRO (SW) units operates directly with solar panels, without any batteries between. You can also switch it to grid or generator for clean water production during non-solar hours.

Energy source

SolarRO PRO unit operates directly with solar panels, without any batteries between. You can also switch it to grid or generator for clean water production during non-solar hours.

Easy to use

Install the unit ́s suction hose into the water source, connect the solar PV cables and push the start button and you begin to get clean water. No other adjustments needed.

Water source

When water source is a borehole or well, usually a submersible pump is used to feed water into an intermediate tank, which can be on the ground level or higher installed. The unit uses this tank as its water source.

Easy maintenance

All the filters and membranes are readily accessible for very easy replacement. The filters can be changed to new ones in a couple of minutes. Also the membranes are very easy to replace, taking 5–10 minutes each. Depending on the user case, pre- treatment filters should be changed 2–4 times per year. We recommend changing the RO membranes every 3–5 years. 

The PRO (SW) units have an integrated membrane cleaning system for better production efficiency and longer membrane life span.

Great durability

The SolarRO Pro units are made from the very best materials and the aluminium frame, pressure vessels and tubes are expected to withstand at least twenty years.

SolarRO PRO 250 SW

  • High-quality drinking water from the sea in off-grid locations.
  • Safe and durable solution.
  • Clean drinking water production from Atlantic 230 litres/hour.

Technical Specifications

 

Tested approx. product water (permeate) flow

Feed water

Feed water TDS


Test water temperature

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


Pre-filter casing

Permeate post treatment

UV lamp life span

Permeate quality

Power requirement


PV panels recommended

Alternative power supply

Dimensions


Weight


Warranty

250 L/h  - 230L/h

Pacific/ Atlantic

33.000 mg/L -  36.000 mg/L

20C

99.4 %


1.5kW/230 VAC/50Hz


Rotary vane


approx. 52bar, automatically self-adjusting


4 x 2540 SW, composite


4 x 2540 SW, polyamide


SS 316L


3 x 10” thick, (5μm, 50μm ,100μm PP filter)


3 x 10", PVC


1 x 10” 5μm 800mg active carbon + UV


10.000 hours


pH 6.5 -8.5, TDS 85 - 160 mg/L, 100% disinfected

max. 1-5kW


10 x 250 Wp


Grid 230VAC or Generator 2kW/230VAC/50Hz


L = 1.5m, W = 0.6m, H = 1.4m


120kg


1 Year (filters & membranes not under warranty)

 

SolarRO PRO 750 SW

  • Potable drinking water from the sea in remote locations.
  • Just plug and switch.
  • Clean drinking water production from Atlantic 700 litres/hour.

Technical Specifications

Feed water type


Pacific

Atlantic

Mediterranean

Tested average permeate flow

Feed water TDS

800 L/h

33.000 mg/L

700 L/h

36.000 mg/L

600 L/h

40.000 mg/L

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


99.4 %


3 kW; 400VAC, 50Hz


High pressure feed max. 30 LPM

51bar


2 x 4080


4 x 4040 SW


SS 316L


3 x 10” thick, (5μm, 50μm ,100μm PP filter)


Permeate post treatment:

UV lamp

UV lamp life span

 

400 J/m2

10.000 hours


Product water:

 

Water (Premeate) quality

 

 

pH 6.5 - 8.5; TDS < 270 mg/L; 100% disinfected

Power supply:

 

Solar PV panels recommended

Solar Inverter

 

 

20 x 250Wp

3kW

Alternative/ Back-up power supply:

3-ph 380 - 480VAC 50 Hz

Dimensions:

RO Unit Stand

Warranty

 

 

L=260cm, W=50 cm, H= 84cm


1 Year (filters & membranes not under warranty)

SolarRO PRO 1500 SW

  • Potable drinking water from seawater.
  • Modular design makes the system scalable.
  • Clean drinking water production from Atlantic 1500 litres/hour.

Technical Specifications

Feed water type


Pacific

Atlantic

Mediterranean

Tested average permeate flow

Feed water TDS

1700 L/h

33.000 mg/L

1500 L/h

36.000 mg/L

1300 L/h

40.000 mg/L

Salt Rejection

Motor


Pump


System pressure

Pressure Vessel

Membrane

RO tubing


Pre-filter


99.4 %


7kW; 400VAC, 50Hz


High pressure feed max. 30 LPM

54 - 56 bar



6 x 4080


12 x 4040 SW


SS 316L


3 x 20” (100μm, 25μm, 5μm)

Permeate post treatment:

UV lamp

UV lamp life span

 

400 J/m2

10.000 hours


Product water:

 

Water (Premeate) quality

 

 

pH 6.5 - 8.5; TDS < 270 mg/L; 100% disinfected

Power supply:

 

Solar PV panels recommended

Solar Inverter

 

 

40 x 250Wp

8kW

Alternative/ Back-up power supply:

3-ph 380 - 480VAC 50 Hz

Dimensions:

RO Unit Stand

Warranty

 

L=260cm, W=80cm, H=158m


1 Year (filters & membranes not under warranty)

Please Contact Us for a Quote